|
Awards
TC-11 received a coveted Retailers Choice Award at the 2002 National Hardware Conference.
TC-11 followed
up on that award with a Dealers Pick Award at the 2002 Hardware Conference. |
 |
 |
Sample Testimonials
I consider TC-11 to be the best gun and knife oil
on the market - Rick White
I am a fishing
reel repair technician here in Florida. I
have tried all the different brands of
anti-corrosive products on the market,
without much success. They all claim to stop
and prevent corrosion from saltwater and
salt air. None have lived up to the
advertising hype. Last month I was in the
local hardware store looking around, and
happened to spot a small display of your
TC-11 product. I thought, what the heck, it
is worth a shot. Wow, was I glad I did!!!
After a few tests on the product, I am
thoroughly sold on your product. I just went
back to today, and bought out the remaining
seven precision oilers, and ordered some
more. Also bought 4 cans of the spray to put
on guides on rods. That is enough to last me
for a few months, because I also use it on
freshwater reels. I have found that most of
the freshwater lakes and streams are
becoming saline at a rapid rate.
Again, thank you for your product, and I am
passing on the information to all the other
reel techs I know! - Charlie Yeager
TC-11 is a great product. I have several
cans around my house and barn, and I I have
sent them to my family and friends all over
the country. - Neal Grolnic
After trying everything from
heat, a large hammer, WD-40®,
pullers, absolutely everything, this flywheel would not come off. I was afraid
that I was going to have to cut it off and buy a new flywheel and crankshaft.
That
would have set me back a little over $900. But as soon as I thought my luck was
gone, TC-11®
to the rescue. I heard about it, thought about it, bought it. For the $10 at a
local ace hardware store it saved me a fortune. Thank you. - Danny Walton


My sailboat,” Lady Kate“, sits in Channel Island Harbor and is
exposed to the salt water and corrosive elements associated with
year-round weather.
I usually spend the first few visits after the winter just cleaning
and polishing her up, checking gear and polishing the “stainless”.
But this past fall I prepared a little differently. After I had
cleaned and scrubbed down the boat and winterized the engine I
sprayed TC-11 on everything. Really everything, engine got it on all
surfaces, including spark plugs, ignition wires, hoses. Back of
electrical panels got a spray too. All the so called ‘stainless’
fittings and hardware got a spray and sail tracks and even the
cleats got a liberal dose. Seems like I used one whole can of spray
on her.
Well what a difference .This spring I wiped down the engine some and
hosed off the decks and fittings. All the "stainless" was as free of
corrosion as when I had left it in the fall. The engine is clean and
shinning. As I replaced the plugs I noticed there was not the usual
rust on them I saw each year before. Even the hoses seem supple and
look good.
So I thought I should let you know that it sure worked for me. In
today’s world of over hyped products this one sure lives up to the
advertising - Lyman Young
I have a fairly new bike, a
Cannondale which gets lots of mileage. It is the rainy season now in
Florida, and with traveling and bringing my bike all over the Southeast
US, it has gotten a lot of rain and unwanted moisture.
There was a
lot of rattling and rubbing of the gears and derailleur, and the chain
was filthy and dry and noisy. I was worried that some parts had become
damaged due to the lack of lubrication and grit/dirt in the components.
So, I pulled
out the TC-11 syringe and started to squirt into the rusted Allen bolts
that wouldn't open. Lo and Behold, they started to loosen up right
away.
Then, I
cleaned the derailleur and chain as best as I could with a rag. Then I
applied the TC-11, rubbed it off, and then applied a complete but thin
film everywhere. I let the bike sit for 4 hours.
When I took it
out, it was like brand new. Noiseless and smooth gear operations were
amazing. It is the best lube for a bike I have ever used. I have biked
across the U.S., and across Iowa 6 times, and many other long distance
treks. This TC-11 is the only thing I will use on my bike. It is some
amazing stuff!! - David Blum
My name is Frank Koz, and I own Ocean Marine Electronics - a sales and
service company for the marine industry. Recently, one of my customers
called me to repair his $6,000.00 radar. Upon inspection of the antenna, I
found extensive water damage. The printed circuit boards were green
with corrosion. I didn't know if I could salvage them. Being out of the
cleaner that I normally would have used, I purchased a can of TC-11. Your
product, I found out, not only removed the corrosion, but was easy to remove
the residue. Upon reinstalling the unit, The customer thought I purchased
all new boards, and was ready to cash in an IRA for the repair. He was
amazed that all the boards were salvaged, and the bill, including labor, was
a little more then $500.00, including the $10.00 for your product. Your
TC-11 will, from now on, be the only cleaner in my vehicles.
"I
own a 1,400 horsepower flat bottom drag boat and I do the engine work myself. I
used TC-11 for all aspects of rebuilding the engine, including removing carbon
deposits from the very expensive ceramic coated pistons. I also used TC-11 to
remove the harmonic balancer from the crankshaft. TC-11 penetrated the entire
thickness of the balancer in a matter of minutes, and it made removing the
balancer very easy. I think that it is a great product": Barry Black, Gene Black
Racing.
"TC-11 and 0000 steel wool is great for taking rust
off of the spokes on my Harley Davidson. As you can imagine, I will not let
anything touch my Hog that could possible hurt it. The ability of TC-11 to melt
rust without affecting rubber, paint, and plastic is simply amazing": Major
Bertagnolli, United States Army.
TC-11
removes adhesive from plastics much better than any other product on the market,
including WD-40. It takes of the adhesive, and it has no affect on the acrylic
plastic. It is remarkable": Steven LaChappelle, Manhattan Beach, California.
“TC-11 is a much better product than PB Blaster”:
Galen Moffett, Owner, Central Ace Hardware, Miami Beach, Florida.
“I really think TC-11 is a great product”: Ray
Paquin, Plumbing Department Manager, B&B Ace Hardware, Los Angeles, California.
I use TC-11
on the things that I really care about”: Dr. Chun, Honolulu, Hawaii.
“TC-11 is an excellent penetrant”: Ed Hess, Manager,
Beach Ace Hardware, Fort Lauderdale by the Sea, Florida.
“TC-11 is an effective corrosion control product”:
Chuck Van Arsnwaldt, Assistant Sales Manager, Pacific Machinery (Caterpillar).
“TC-11 is a great product”: Dave Purrington, Vice
President, Hardware Hawaii Ace, Kailua, Hawaii.
"TC-11 can
un-freeze fasteners that I would consider to be hopeless. I was very skeptical
when I first heard about TC-11, but when I saw TC-11 free heavily rusted bolts
in a matter or seconds I was convinced": Colonel Julius Yucker, United States
Air Force (Retired).
“TC-11 is the most effective product in its class
that we have come across”: Lee Wegner, Owner, Do-It-Best Hardware and Home
Center, Lexington Kentucky.
“TC-11 definitely reduces the amount of time we have
to spend to prep equipment before delivering it to the customers, and they like
corrosion free machines”: Jeff Feyereisen, Vice-President, Allied Machinery
(Case).
“I put TC-11 on everything”: Dr. Click,
Honolulu, Hawaii.
Aloha Cargo Transport, Inc
6700 West Marginal Way, S.W., Seattle, WA 98106
800-327-7739 / 206-762-5955 / FAX 206-762-1041
January 23, 2002
To Whom It May Concern,
Aloha Cargo Transport is in the business of servicing the ocean barge shipping needs of Alaska and Hawaii. Our barges are exposed to some of the roughest ocean conditions on the planet, and we used to accept corrosion damage to deck freight as an inevitable part of ocean shipping.
When Bruce Huddleston first approached me about using TC-11 to prevent corrosion on equipment shipped on the deck, I was very skeptical. Over the years we had tired a number of "corrosion inhibitors", and they either allowed rust to form unabated, or if they did prevent rust we learned that it was difficult to remove the residue.
We tried TC-11 in July of 2001 and it has been so effective in controlling corrosion that we now offer it as an optional treatment for all of our customers. Some customers, such as dealers for Caterpillar and Case, insist upon TC-11 being applied to every piece of equipment that is put on a barge for shipment. Our customers inform us that TC-11 is highly effective in controlling rust, and best of all, it is easy to remove without the need for soap or degreasers.
Sincerely

Richard Maxwell
General Manager

Dear TC-11,
We had a customer doing repairs who had a corner crimper that kept jamming up on him. He had to apply a lot of pressure when trying to crimp corners. He came in and asked for a lubricant. We gave him TC-11 and the tool was miraculously repaired. It worked like a charm. We had a guy come in recently who noticed another lubricant we have in stock and we suggested he go for the TC-11 instead. It's not just a lubricant, it also prevents corrosion. We suggest it to anyone who comes in looking for any type of lubricant or corrosion inhibitor.
Mike Coupe
Manager
Beach Ace Hardware
Fort Lauderdale, FL
Dear TC-11:
The lubricants we sell are not penetrants like TC-11. The first time I bought it, I brought in a couple of cases. Now I am buying five or six cases at a time. When you have fittings that are rusted and you can't get them apart, TC-11 is the perfect solution. I tried TC-11 myself here in the store. I couldn't get a stem out of a handle, so I sprayed the inside of the handle and it popped right loose after I let it soak in TC-11. Then I suggested it to a plumber who couldn't get his fittings apart. The stuff just broke right apart. I really think it's a great product. I have even given it to family members to use. It is ideal for lubricating parts and to keep pieces from getting rusty and squeaking.
Ray Paquin
Plumbing Department Manager
B&B Hardware
Los Angeles, CA
Dear TC-11:
The first time I used TC-11, I was working on my backyard patio cover. I had a nut and bolt on a bracket that were very heavily corroded. I couldn't break it free dry, but as soon as I used TC-11 it came right apart. I use TC-11 on my boat to spray down the electrical connections and the motor. I have also given TC-11 to a local engine shop.
John Corneau
Simi Valley CA
Homeowner & Internet Developer
|